Rutgerson, RAW turtle block 35mm horizontal plate

Description

This turtle block with a horizontal plate is designed to guide lines close along the mast or curved surfaces. It provides a stable turning point, making it easy to keep control lines organized and close to the boat’s structure.

• Brand: Rutgerson
• Working load: 450 kg
• Breaking strength: 850 kg
• Sheave diameter: 35 mm
• Rope Ø: 3-8 mm
• Product weight: 70 g
• Product dimensions: 20/37 mm × 74 mm
• Package dimensions: Dimensions: 3 cm × 4 cm × 9 cm | Gross weight: 0.1 kg

This turtle block with a horizontal plate is developed to guide lines close along the mast or other curved surfaces. It provides a fixed turning point, making it easier to keep control lines organized and close to the boat’s structure. The block is relevant for sailors who want a stable and reliable solution for halyards, trim lines and control lines. The block is built with a plain bearing that ensures smooth rotation and low friction, even when the line is under load. The sides and sheave are made of composite for low weight and durability. The horizontal, curved stainless steel plate is shaped to sit naturally against the mast or other curved surfaces, so the line stays stable and without twisting. The turtle block functions as a fixed block in the rigging, typically at the mast base or in places where the line needs to be turned or led in a specific direction. It can be used with most halyards, trim lines and control lines and fits well into setups where lines are led aft or kept close to the boat’s surface. It can be mounted on both flat and curved surfaces depending on the boat’s design. The block is easy to position, and the curved plate makes it suitable on the mast, where ordinary blocks do not follow the shape. It is useful for both racing sailors and cruisers who want a clean and tidy line layout. The composite materials provide low weight and minimal maintenance, while the stainless steel plate ensures stable attachment.

INSTRUCTIONS FOR USE Preparation: Clean the mast or mounting location and check that the surface is even.

Mounting: 1 Position the block so the plate follows the curve of the surface. 2 Mark and pre-drill the holes if necessary. 3 Secure the block with stainless steel screws of the appropriate size.

After mounting: Lead the line through the sheave, test the load, and check that the block runs freely without twisting. Rinse with fresh water after sailing to extend service life.