Victron, Orion-Tr Smart galvanic charger 24 - 12V 240W

Description

Orion-Tr Smart 24/12-20A is an isolated DC-DC battery charger that converts 24 V to 12 V. It is ideal for charging a 12 V house battery from a 24 V system in boats, vehicles, and other installations.

• Brand: Victron
• Weight: 1.3 kg
• Amp: 20 A
• IP rating: IP43
• Volt: 24-12 V
• Watt: 240 W
• Package dimensions: Dimensions: 13 cm × 10 cm × 21 cm | Gross weight: 1.3 kg

Orion‑Tr Smart 24/12‑20A is an isolated DC‑DC battery charger for boats, vehicles, and other installations where you need to charge a 12 V house battery from a 24 V system. It provides stable and safe charging with a focus on proper battery care and reliable operation. The charger is relevant in dual-battery systems, where you want to ensure consistent charging during sailing or driving. The charger converts 24 V into a stable 12 V output with up to 20 A continuous charging current and a maximum output of 240 W. It works as a professional 3-stage charger with adaptive control, ensuring correct bulk, absorption, and float charging. The design is galvanically isolated, which increases safety and eliminates the risk of unwanted currents between the systems. Bluetooth control makes it possible to monitor and adjust charging profiles via the app.Orion‑Tr Smart is typically used in boats and vehicles with smart alternators or traditional alternators. It acts as the link between the starter battery and the house battery and can also be used as a pure DC power supply when a stable 12 V output is required. It supports both lead-acid and lithium batteries and can be included in parallel installations if power demand increases.The charger is relevant for boat owners, campers, and installers who want simple setup and ongoing monitoring via mobile. It is useful in installations with high loads, or where the battery often needs to be charged during operation. Galvanic isolation provides extra protection in marine environments, where electrical noise and corrosion can be a problem.

INSTRUCTIONS FOR USE Preparation: Disconnect the power and plan the cable routing. Use the correct cable sizes and fuses according to the manufacturer's recommendations. Installation: Mount the charger close to the house battery for minimal voltage drop. Connect the input first (24 V), then the output (12 V). Check polarity. Setup: Open the Victron app and select battery type and charging profiles. Operation: Start the engine/generator and verify that charging occurs as expected. Monitor temperature, connections, and any error messages in the app. Final check: Tighten terminals and inspect the installation regularly.